melting speed
英 [ˈmeltɪŋ spiːd]
美 [ˈmeltɪŋ spiːd]
网络 熔化速率; 熔速; 熔化速度
双语例句
- He said that the glaciers on the Himalayas are melting and disappearing at the speed of10 to20 meters a year.
据他所言，喜马拉雅山上的冰河正以每年10至20公尺的速度融化、消失。 - Lower melting, rapid melting speed, good flow and good lubricity, which benefit for desulphuration effect.
熔点低、熔化速度快、流动性好、润滑性好，有利于脱硫效率的提高。 - This article introduces the double pole series circuit structure and the constant power, as well as the application of control technical to a constant melting speed in melting process.
详细介绍了双极串联结构及恒功率、恒熔速控制技术在电渣炉冶炼中的应用。 - A new method of using the time of last inflection of burning curve of mold powder as the index of the melting speed is developed.
提出了以保护渣烧损曲线最后一个拐点对应的时间来表征其熔化速度的新方法。 - Based on analysis for vacuum arc remelting process and according to actual melting condition, some partial strategies which is helpful for control of melting aim were presented, for example, arc length control, melting speed control, decouple control and so on.
摘要通过对真空电弧重熔炉工艺过程的分析，根据冶炼实际情况，提出了一些有助于控制冶炼目标的局部策略，如弧长控制、熔速控制、解耦控制等。 - The process characteristics of newly introduced melting and casting machine are explained from five aspects, such as high melting speed and heat efficiency of melting furnace;
阐述了新型铝熔铸机组的熔铝炉熔化速度快，热效率高； - Observation of Melting Pool and Electrode during TIG Arc Welding from High Speed Video Image
高速摄像技术中TIG焊接过程的熔池和电极研究 - An experimental research on melting property of high speed casting mold powders
高速连铸保护渣熔化特性的实验研究 - The melt flow properties and the spinning temperature range of far infrared polypropylene ( PP) fiber were investigated. The relation between melting index of far infrared PP slice and spinning speed was discussed.
研究了远红外丙纶熔体的流动特性和合理的纺丝温度范围，讨论了远红外丙纶切片的熔融指数与纺丝速度的关系。 - Results have shown that quite high thermal stability can be obtained by melting and coating high speed steel specimen substrate with the ( WC+ B) powder.
结果表明，在高速钢上熔覆（WC+B）粉料可以获得很高的热稳定性。 - The Application of Laser Melting and Covering Technology to the Repairing of High Speed Compressor Rotor
激光熔覆技术在修复高转速空压机转子中的应用 - Methods To contrast the phenomena in the melting process, through different gather consistency of platelets, melting temperature and adding speed of dimethylsulphoxide ( DMSO), shaking it or not after platelets being gathered.
方法对血小板收集浓度、二甲基亚砜融化温度、采后震荡与否、加入速度以及融化过程进行分组观察。 - After the length of water-cooling pipe, thickness of crucible-wall, inductance, feedback capacity, resistance of bias grid, and the size of raw materials were changed, an ideal operation condition and faster melting speed were obtained.
在改变了阳极冷却水管长度、熔炉坩埚壁厚、电感、反馈电容、栅极偏压电阻和炉料尺寸大小等之后，获得了较理想的工作状态和比较快的熔炼速度。 - In this paper, experiments were carried out for investigating action law of bringing down melting temperature. Constitute and content of high speed casting mold powders were discussed in view of melting property.
在不同条件下对Li2O降低保护渣熔点作用规律进行了实验研究，分析探讨其满足高速连铸保护渣熔化特性要求的配比及含量。 - The melting temperature and adding speed of DMSO made an impact on the quality of platelets;
DMSO融化温度、加入速度对血小板质量有显著影响（P<0.01）； - Weld penetration and wire melting speed of AC PMIG welding not only have relationship with welding current but also with electrode negative ratio.
交流脉冲MIG焊其焊缝熔深及焊丝熔化速度不仅与焊接电流有关，而且与负极性比率有关。 - Brief Discussion on How to Improve Melting Speed of MF Induction Furnace
浅析怎样提高中频感应炉熔化速度 - The influences of the factors, such as laser power, melting zone shape, diamter ratio, pulling speed and so on, to Ti: sapphire fiber qualities in the fiber growth by laser-heated pedestal growth ( LHPG) method are reported.
本文报道了用激光加热基座法生长钛宝石单晶光纤中，激光功率、熔区形状、拉速及直径比等因素对光纤质量的影响。 - In this paper, the result of analysis and compare in six kinds of imported protective slag shows that element of melting temperature is differently affected on melting speed of protective slag from that of carbon and carbonate content.
本文通过对六种进口保护渣的剖析结果的比较和分析，阐述了熔化温度、含碳量、碳酸盐含量等因素对保护渣溶化速度的不同影响。 - Study on melting speed of continuous casting mold powder
含碳材料对连铸保护渣熔化速度影响的研究 - Research on ESR High Al and Ti Content Alloy Under Constant Slag Resistance and Melting Speed
恒渣阻恒熔速重熔高铝钛合金研究 - Analysis of Melting Speed of Protective Slag in Contiuous Casting Maching Mould
连铸结晶器保护渣熔化速度分析 - When electrode negative ratio is zero, which is using MIG welding with DC ami welding wire being positive polarity, weld penetration is maximum, wire melting speed and deposition rate are minimum;
当负极性比率等于零即直流且焊丝为正极性的MIG焊时，其焊缝熔深最大，焊丝熔化系数最小，熔敷速度最小； - The arc has a self-regulating effect on melting of two cores, that is, during the arc burning, even if the ends of two cores have different length in the arc, two cores can keep uniformly melting speed, and the arc can stably burn.
双电极焊条单弧焊电弧对两焊芯的熔化存在自调节作用，即电弧燃烧过程中两焊芯端部在电弧中的长度不等，两焊芯仍能保持等速熔化，使电弧燃烧过程能够稳定进行。 - As electrode negative ratio increases weld penetration decreases, at the same time, wire melting speed and deposition rate increase.
随着负极性比率增加，焊缝熔深减小，同时焊丝熔化系数增加，熔敷速度增加。 - The MIG welding is a traditional and efficient welding method. The wire melting speed is very high because of the high current density of the wire and arc, thus the deposition efficiency is high and penetration and welding distortion is better.
MIG焊接是一种常用的高效焊接方法，其焊丝和电弧的电流密度大，焊丝熔化速度快，对母材的熔敷效率高，母材熔深和焊缝成型较好。 - The melting speed of polymer in barrel decreases with the preheating time cooperating with the change of temperature.
与温度变化相协同，高聚合物在机筒内的融化速率随预热时间逐渐减小。 - Chiral fiber gratings ( CFGs) are a new kind of optical waveguide structures, and can be manufactured by spinning optical fibers or preform with non-circular symmetry cross section at melting state at high speed.
手征光纤光栅是一种新型的光波导结构，它是通过熔融条件下高速扭转截面非圆对称光纤制作而成的。 - After that, the changing of microstructure and composition of solder between before and after the high temperature treatment was observed. ( 2) The composite solder with different Ag layer were heated to melting temperature and cooled to room temperature at different speed.
对焊料进行高温保持处理，观察和分析不同厚度复合焊料处理前后显微结构和成分的变化。（2）对覆盖有不同厚度Ag层的Ag-In复合焊料加热到熔点，然后以不同速度冷却到室温。